KONG Italy Q.R.K. Mode D'emploi page 11

SECTION
2.1 GENERAL INFORMATION
PLEASE NOTE
Users must read and fully understand the
information provided in this manual before
using the product. Any modification, even
minimal, of the device is forbidden. Any
modification is taken as being tampering
and may prejudice correct functioning of
the device. Opening the leaded cable to
prevent unscrewing, below the release
button (C) is taken as being tampering.
a) Before and after use do all the checks
described, and especially make sure
the product is in perfect condition, it is
working correctly, and that it is suitable
of the purpose for which you intend to
use it. The user is responsible for correct
use of this product.
b) If you have the slightest doubt about
the product's
conditions, replace
Do not use the product after a fall as
any internal damage or deformation
not visible from outside could have
considerably reduced
Incorrect use, mechanical deformation,
accidental dropping of the device from
a height, wear, chemical contamination,
exposure to heat other than normal
weather conditions (-40°C / +100°C),
are other things that can reduce, limit
and even terminate the lifespan of the
product.
www.kong.it
safety and working
it immediately.
its strength.
INFORMATION
c) Your life depends on the constant
efficiency of your equipment and its
history (use, storage, checks, etc.).
d) This product can be used combined
with personal protective equipment
that conforms to Directive 89/686/
EEC when compatible with the relevant
product information. When you intend
to combine two (or more) products read
the instructions for all of them carefully.
e) All KONG products are tested/inspected
piece by piece in accordance with
the procedures of the Quality System
certified according to the UNI EN ISO
9001 standard. This personal protective
equipment is certified and, where
applicable, its production is subject to
supervision by the accredited authority
indicated in the specific instructions for
the product.
PLEASE NOTE
Laboratory tests, inspections, information
and norms do not always manage to
reproduce what actually happens in
practice, and so performance under real
usage conditions in a natural environment
can differ, sometimes even considerably.
The best information can be gained by
continual practice under the supervision
of skilled, qualified instructors.
USER
Q.R.K. Quick Release Kong
11