KONG Italy Q.R.K. Mode D'emploi page 12

2.2 SPECIFIC INFORMATION
PLEASE NOTE
The Quick Release Kong must
be used by skilled personnel that
have been specifically trained and
instructed.
2.2.1 Positioning on the aircraft
The Q.R.K. must be connected up to a
suitable anchor point (check the user's
instructions for the aircraft, or contact the
manufacturer).
2.2.2 Release
To open the Q.R.K. the safety clip (D) must
be removed and the release button (C)
must be pushed.
Precautions when releasing.
12
To open the anchoring bracket, remove
the screw locking clip and unscrew the
bracket's locking screw.
The safety clip must ONLY be removed
immediately prior to pushing the release
button (C) - the force required to push the
button depends on the suspended load.
fig 4