KONG Italy Q.R.K. Mode D'emploi page 13

2.2.3 Resetting
To reset the Q.R.K. button (C) must be
pushed.
The horizontal arm (B) is easier to put back
Warning! Resetting is only deemed to be complete once the safety clip (D) has been put
into the relevant hole.
www.kong.it
fig 5
into position by pushing the button (C) and
the upper part of the vertical arm (F) as
indicated by the arrow, at the same time.
fig 6
fig 7
Q.R.K. Quick Release Kong
13