CF MOTO CFORCE 1000 Guide De L'utilisateur page 164

Wheel and Tires
Removal and installation
Removal
1� Loosen the wheel nuts
2� Elevate the ATV and place a suitable stand under the frame.
3� Remove the nuts from the wheel.
4� Remove the wheel�
Installation:
1� Install the wheel and the nuts.
NOTE
• Tapered nuts are used for both the front and rear wheels.
Install the nut with its tapered side towards the wheel.
• The arrow mark on the tire must point toward the rotating
direction of the wheel�
2� Lower the ATV so that the wheel is on the ground.
3� Tighten the wheel nuts to the specified torque.
NOTE
Wheel nut torque:
MAINTENANCE
�
1
Front: 52.4lb-ft~59lb-ft
(70 N•m~80 N•m);
Rear: 52.4lb-ft~59lb-ft
(70 N•m~80 N•m)
160
1 1