CF MOTO CFORCE 1000 Guide De L'utilisateur page 107

Driving procedure
1� Sit upright with both feet on the footrests and both hands on
the handlebars.
2� Start the engine and allow it to warm up. Apply the foot brake,
then shift the transmission into low gear�
3� Check your surroundings and determine your path of travel.
4� Release the brakes.
5� Slowly press the throttle with your right thumb and begin
driving. Vehicle speed is controlled by the amount of throttle
opening�
6� Drive slowly. Practice maneuvering while using the throttle and
brakes on a level surface.
OPERATION OF YOUR ATV
103