CF MOTO CFORCE 1000 Guide De L'utilisateur page 136

Maintenance Procedures
Engine oil
Always check and change the engine oil at the intervals outlined in
the Maintenance Schedule.
Engine oil check
1� Place the ATV on a level surface.
2� Start the engine and let it idle for 20~30 seconds� Stop the
engine�
3� Wait a short period for the oil to settle�
4� Remove access cover
pulling firmly.
5� Unscrew the oil dipstick
6� Insert the dipstick back into the dipstick hole, make the dipstick
threads contact the hole surface without screwing it.
7� Remove the dipstick again and check the oil level indication�
Maintain the oil level between the upper and lower indicators.
8� Reinstall the dipstick into the oil filler hole, hand-tighten it, and
reinstall the access cover�
NOTE
Access cover grommets may come loose. Ensure they are in place
before reinstalling the cover.
MAINTENANCE
by grasping the lower left portion and
1
out and wipe off with a clean cloth.
2
132
1
2
max
min