CF MOTO CFORCE 1000 Guide De L'utilisateur page 146

9� Install the coolant reservoir hose�
10� Fill the recommended coolant into the radiator until it is full.
When filling coolant, at the same time to loosen the drain
bolt as shown in order to draw air from the coolant hose until
coolant flows out, then tighten the bolt.
NOTE:
Coolant drain bolt tightening torque:10 N•m
NOTE:
Recommended antifreeze:
High quality ethylene glycol antifreeze containing corrosion
inhibitors for aluminum engines. Antifreeze and water mixing
ratio:1:1
Total Coolant Capacity (except coolant reservoir): 3.7L
Coolant Change (except coolant reservoir): 3.6L
Coolant Reservoir Capacity: 0.2L~0.38L
(Lower mark: 0.2L / Upper mark: 0.38L)
CAUTION
Hard water or salt water is harmful to the engine.
Please use CFMOTO recommended coolant.
MAINTENANCE
142
1