CF MOTO CFORCE 1000 Guide De L'utilisateur page 147

11� Install the radiator cap�
12� Start the engine and let it idle for several minutes .Stop the engine. Allow the engine to cool completely,
then check the coolant level in the radiator. If it is low, add more coolant until it reaches the top of the
radiator�
13� Fill the coolant reservoir with coolant up to the upper limit.
14� Install the coolant reservoir cap and check for coolant leakage�
NOTE: If any leakage is found,have your dealer check the cooling system.
15� Install the panels and the front access cover�
Cleaning
Cleaning the external surfaces of the radiator if it is covered with mud or debris will ensure it continues to
efficiently cooling the engine. Use only low pressure water to clean the radiator. High pressure washers can
damage components. Ensure that the water can flow can flow freely through the radiator fins. This is a sign
that cooling air will be allow to pass through.
MAINTENANCE
143