Analog way SMART FADE SMF251 Manuel Utilisateur page 11

SMART FADE™
4-4. RGB/S & COMPONENT INPUT
RGB/S VIDEO SIGNAL
The RGB/S signal, also called RGB Sync., is an RGB signal with COMPOSITE Sync. This signal is widely used in
broadcasting and is available on European DVD players and Satellite receivers. The RGB/S signal is transmitted with 4
coaxial cables, and it has a better picture quality than COMPOSITE or S.VIDEO signals. The RGB/S connectors are
usually BNC connectors for Broadcasting equipment, and SCART connectors for DVD players and Satellite Receivers.
COMPONENT VIDEO SIGNAL (Y, R-Y, B-Y)
The Component Video signal, also called YUV (Y, R-Y, B-Y), or BETACAM
available on high-quality DVD players. The COMPONENT signal is transmitted with 3 coaxial cables, and also has a
better picture quality than COMPOSITE and S.VIDEO signals. The COMPONENT connectors are usually RCA (x3), or
BNC (x3) connectors.
4-5. COMPUTER INPUTS
™
The SMART FADE
front panel). These inputs are used to pass-through any COMPUTER signals. In SEAMLESS mode, the signal connected to
one of the 2 inputs is used as the "reference". Then each video input will be scale to the same referenced format before to
be displayed onto the output.
is provided with two COMPUTER inputs: COMPUTER 1 (in rear panel) and COMPUTER 2 (in
CONNECTION
CONNECTION
Chapter 4 : STARTING
™
, is widely used in broadcasting and is
PAGE 11