Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Chapter 9 : CONTROL SOFTWARE
Chapter 9 : CONTROL SOFTWARE
9-1. CONNECTION
• CONNECTING THE RS-232:
• If you use the SMART FADE
- Connect the serial port of your Control Device (PC) to the REMOTE CONTROL (RS-232) connector (DB 9
Female) of the SMART FADE
• If you use the SMART FADE
- Connect the serial port of your Control Device (PC) to the REMOTE IN (PC) connector (DB 9 Female) of the
SMV415 with a straight cable (DB 9 Female / DB 9 Male).
- Connect the REMOTE OUT (CHAIN) connector (DB 9 M) of the SMV415 to the REMOTE CONTROL (RS
232) connector (DB 9 Female) of the SMART FADE
NOTE : The Remote Keypad (RK251) is not compatible when the SMART FADE
• If you use the SMART FADE
- Connect the serial port of your Control Device (PC) to the REMOTE IN (PC) connector (DB 9 Female) of the
SMA415 with a straight cable (DB 9 Female / DB 9 Male).
- Connect the REMOTE OUT (CHAIN) connector (DB 9 Male) of the SMA415 to the REMOTE IN (PC)
connector (DB 9 Female) of the SMV415 with a straight cable (DB 9 Female / DB 9 Male).
- Connect the REMOTE OUT (CHAIN) connector (DB 9 M) of the SMV415 to the REMOTE CONTROL (RS-
232) connector (DB 9 Female) of the SMART FADE
PC
NOTE: The Remote Keypad (RK251) is not compatible when the SMART FADE
SMA415.
PAGE 26
™
alone :
™
with a straight cable (DB 9 Female / DB 9 Male).
PC
KEYPAD
RK251
™
with the SMART SWITCH VIDEO
PC
™
with the SMART SWITCH VIDEO
SMA
OR
SMF-251
™
with a straight cable (DB 9 Female / DB 9 Male).
SMV
™
with a straight cable (DB 9 Female / DB 9 Male).
SMV
™
:
SMF251
™
is used with the SMV415.
™
and with the SMART SWITCH AUDIO
SMF251
™
is used with the SMV415 &
SMART FADE™
™
:
Publicité
Table des Matières
