Analog way SMART FADE SMF251 Manuel Utilisateur page 23

SMART FADE™
6 [CONTROL MENU] + ENTER.
[languages] + ENTER.
6-1
[key locking] + ENTER.
6-2
Select which locking function you need with LCD CONTROL + ENTER.
• [all unlock] = All front panel switches are unlocked.
• [all lock] = All front panel switches are locked.
[extend switch] + ENTER.
6-3
Select this function if you use a SMART SWITCH VIDEO
(SMA415) connected to your SMART FADE
• [NO] = No SMART SWITCH connected to the SMART FADE
• [YES] = SMART SWITCH connected to the SMART FADE
[version] + ENTER.
6-4
Status of the internal firmware :
[default value] + ENTER.
6-5
• [NO] =
No Adjustments and Settings are modified.
• [YES] = Clears the following Adjustments and sets them to the Factory Setting.
1-1
1-3
2-1
2-2
2-3
2-4
3-5
3-6
4-1
4-2
4-3-1 VIDEO SWITCH = SMOOTH.
4-3-2 BLACK DELAY = SHORT.
5-1
5-2
5-3
6-3
BLACK = ON.
MUTE = ON.
EFFECT = CUT.
7 [FREEZE] + ENTER.
Select an item with LCD CONTROL + ENTER.
• FREEZE [YES] = Freezes the displayed image.
• UNFREEZE [YES] = Unfreezes the displayed image.
NOTE : The FREEZE function is active only on the TV video inputs.
VIDEO STANDARD = Automatic detection of PAL / NTSC / SECAM / B&W.
RGB / YUV IN = YUV (Component).
OUTPUT SYNC = H & V Separate Sync.
REFERENCE SYNC = Computer 1.
OUTPUT FORMAT = XGA (1024 x 768 : 48KHz / 60Hz if no computer detected on the
Computer 1 Input).
OUTPUT RATE = Internal Rate (Active only if "no computer" is selected in 2-2).
U / OVER SCAN = UNDERSCAN.
ASPECT RATIO = 4/3.
FADING EFFECT = 3 seconds.
TITLE EFFECT = 5 seconds.
MASTER VOLUME = 181.
AUDIO LEVEL = 181.
AUDIO SOURCE = AUTO (FOLLOW).
EXTEND SWITCH = NO.
™
(SMV415) and/or a SMART SWITCH AUDIO
™
.
™
.
™
.
K = xxxx L = xxxx
Chapter 7 : LCD FUNCTIONS DESCRIPTION
R = xxxx V = xxxx
™
PAGE 23