Publicité
Les langues disponibles
Les langues disponibles
You can reset the counter for this parameter by
pressing the button for about 2 seconds at the
MAX function, until the value 00 appears. MAX
can be reset either while the vehicle is moving
or while it is standing still. If you change the unit
of measure, the value is converted in to the se-
lected unit. The data is not permanently memo-
rized.
If there is no power supply, the value for MAX is
permanently lost.
CLOCK FUNCTION (TIME)
This function describes the correct operation/
display of the current time function. This func-
tion is always represented in the format hh:mm,
using digits 6÷9 (fig. G). The clock remains active
even when the micro-controller goes into sleep
mode. The time can be set only when the vehicle
is stopped, by entering the setup menu.
km/h
TOTAL
Clock (fig. G)
The information is not saved in memory. Se-
quence displayed:
from 0:00 to 23:59 for the mode 0-24
from 0:00 to 12:59 for the mode 0-12 a.m.
from 1:00 to 11:59 for the mode 0-12 p.m.
Clock precision: ± 2.5 seconds/day.
All manuals and user guides at all-guides.com
If there is no power supply, the value for
TIME is permanently lost.
MENU' DI SET-UP
Entry into the menu Set-up is possible only when
the vehicle is stationary and engine running by
pressing the button for about 5 seconds at the
function TOTAL. (Entry is inhibited if the power of
the dashboard is given only by the backup bat-
tery to limit the consumption).
The display shows a screen with the word "SET-
UP" (Fig. M) to enter the menu setting of param-
eters. Release the button to access the settings.
Ingresso menù di Set-Up (fig. M)
SETTING THE PARAMETERS
When you release the button after fig. 8-1, the
screens shown in fig. N are shown in sequence.
mph
km/h
Clock adjustment, modification of units of meas-
ure, and exit from the setup menu (fig. N).
Press the button for the function that you want
to modify or at the "OUT" screen to exit the setup
menu.
67
Publicité
