Publicité
Les langues disponibles
Les langues disponibles
[
POWER SAVE]
Power Save Mode (p. 26)
[
LANGUAGE]
Language Setup Sub-menu (p. 22)
[PICTURE PLAYBACK MENU]
e.g.,
BASIC
ADVANCE
SETUP
LANGUAGE
SETUP
ENTER
EXIT
[ BASIC]
Basic Setup Sub-Menu
[
DATE/TIME]
Date and Time Indication (p. 64)
[
PROTECT]
Setting the Lock (p. 41)
[
ADVANCE]
Advance Setup Sub-Menu
[
DPOF SET]
Setting DPOF (p. 41)
[
CARD FORMAT]
Formatting a Card (p. 42)
[
SETUP]
Setup Sub-Menu
[
DISPLAY]
Display Mode (p. 64)
[
REMOTE] (PV-GS35 Only)
Remote Control Mode (p. 15)
[
LCD SET]
LCD Adjustment (p. 21)
[
EVF SET]
Viewfinder Adjustment (p. 21)
[
POWER SAVE]
Power Save Mode (p. 26)
[
LANGUAGE]
Language Setup Sub-menu (p. 22)
Setting Date and Time
Since the internal clock of the Camcorder has a
slight imprecision make sure to check the time before
recording.
30
34
35
• Set to Tape/Card Recording Mode.
24
All manuals and user guides at all-guides.com
Before Using
1
BASIC
2
DATE/TIME
D/T
PROTECT
NO
SETUP
ENTER
EXIT
3
• If the built-in battery is weak, the [
• The clock uses the 12-hour system.
The internal lithium battery sustains the operation
of the clock. If the [
Camcorder is turned on, the internal lithium battery is
near exhaustion.
1
• After charging for 4 hours, the built-in lithium battery
• Leave the Camcorder as is for approx. 24 hours, and
Set [ BASIC] >> [
CLOCK SET] >> [YES].
CLOCK SET
JAN /01/2005 12AM:00
SETUP
SET
ENTER
Move the Joystick Control [◄] or [►]
select Year, Month, Day, Hour or Min. and
move the Joystick Control [▲] or [▼]
set it to the desired value.
• Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
Press the Joystick Control
setting the date and time.
• The clock operation starts from [00] second.
flashes. In this case, charge the built-in battery.
About date/time
• The Date and Time function are driven by a
built-in lithium battery.
• Make sure to check the time before recording.
Internal Lithium Battery Recharge
] or [--] is Indicated when the
Connect the AC Adaptor to the Camcorder
with the power turned off and then connect
to the AC jack.
can power the clock for approximately 3 months.
the battery will drive the Date and Time for approx.
6 months. (Even if the [OFF/ON] Switch is set to
[OFF], the battery is still being recharged.)
EXIT
35
to
to
35
to fi nish
35
] Indication
Publicité
