Publicité
Les langues disponibles
Les langues disponibles
Quick Guide
Using the Battery
1
Attach the Battery to the AC Adaptor and
charge it.
• Before use, fully charge the Battery.
• Since the Battery will not be charged when
the DC Cable is connected to the AC Adaptor,
disconnect it from the AC Adaptor.
• The [CHARGE] Lamp lights up, and charging
starts.
• When the [CHARGE] Lamp goes off, charging is
completed.
2
Attach the charged Battery to the
Camcorder.
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever
the front and pull down to fully open the
Cassette Compartment Cover.
• To protect the tape, if the cover is not fully
opened, the cassette holder cannot be ejected.
2
After the Cassette Holder is opened, insert
a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark
.
2
4
Only after the Cassette Holder is completely
housed, close the Cassette Compartment
Cover by pressing the mark
2
10
All manuals and user guides at all-guides.com
Before Using
1
2
3
4
Before using the Viewfinder, adjust the field of view so
that the displays inside the Viewfinder become clear
and easy to read.
1
2
toward
1
1
1
.
3
3
Inserting a Card
Place your Thumb on the [OPEN▼]
Knob and pull the LCD Monitor
direction of the arrow.
2
1
Slide the [◄OPEN] Lever
Card Slot Cover
.
4
While holding the Memory Card with its cut
corner facing right
insert it into the Card
5
Slot
.
6
Close the Card Slot Cover
Using the Viewfinder
Pull the Viewfi nder.
Adjust by turning the Eyepiece Corrector
1
Knob
.
1
Recording on a Tape
Set the [OFF/ON] Switch
• The [POWER] Lamp
lights up.
2
1
2
1
out in the
2
to open the
3
4
securely.
3
6
4
5
1
to [ON].
Publicité
