Cooke & Lewis CLFLEX2Z30 Manuel D'installation page 29

Use
Using the Pause function
1. When the cooking zones are on, touch the Pause control "
Pause " " and On / Off "
2. Touch the Pause control "
IMPORTANT: Using the Pause control will temporarily stop all cooking, including the Power Timer
IMPORTANT: The maximum pause time allowed is ten minutes, and if cooking is not restarted in
Using the Boil function
Touch the cooking zone selector you wish to control.
Touch the Boil control
Touch the Boil control
Touch the Boil control
Touch the Boil control
The buzzer will sound when the water boils and touch any key to cancel the function.
Touch the cooking zone selector you wish to control.
Move the Power / Timer selector to the new power level or
touch the Boost control once to select the boost function.
IMPORTANT: To boil 2 litres of water choose "2 L" for the rear zone and "L 2" for the front zone.
IMPORTANT: Choose "L 3" / "3 L" or "L 5" / "5 L" for 3 or 5 litres of water respectively.
IMPORTANT: The hob will automatically control the power output and extend the heating time to
" can be used at this time.
" again to recommence cooking and the displays will show the current status.
this time, the hob will automatically switch off.
Activating the Boil function
, the zone indicator shows "L2" or "2L". Use for boiling 2 litres of water.
again, the zone indicator shows "L3" or "3L". Use for boiling 3 litres of water.
for the third time, the zone indicator shows "L5" or "5L". Use for boiling 5 litres of water.
for the fourth time, the zone indicator shows "0" and the boil function is cancelled.
Cancelling the Boil function
protect the circuit from overheating during use.
" and all displays will show "II" and stop heating. Only
option above.
29