Ninja Foodi XL Guide Rapide page 3

Using Two Zones
Not worried about both zones finishing at the same time and want to
shorten cook time? When Smart Finish or Match Cook are not selected, technology
is integrated into the design to automatically optimize the distribution of power
when manually selecting two zones with different cook times. This means
the food in the zone with the longer cook time may finish cooking before the
set time ends. Check food frequently to avoid overcooking.
STEP 1: Program Zone 1
• Place food in baskets.
• The unit defaults to Zone 1.
• Turn the dial to select a cooking
function (e.g., AIR FRY).
STEP 2: Set Time & Temperature
• Use the TEMP arrows to set the temperature.
• Use the TIME arrows to set the time.
STEP 3: Program Zone 2
• Repeat Steps 1 and 2 for Zone 2.
STEP 4: Begin Cooking
• Press center of dial to begin cooking.
• Check food frequently to avoid overcooking.
NOTE: For best results, start checking food for doneness before cook time ends. Stop cooking at any
time if the desired level of crispiness has been achieved, but make sure any raw proteins have reached a
food-safe temperature.
4 Ninja® FOODI® XL 2-BASKET AIR FRYER
+
Using a Single Zone
Only cooking one thing?
Fill a single zone and use it like a traditional air fryer.
STEP 1: Program Zone 1
• Place food in basket.
• The unit defaults to Zone 1.
• Turn the dial to select a cooking
function (e.g., AIR FRY).
NOTE: If you would like to cook in Zone 2 only,
first select Zone 2, then select a function.
STEP 2: Set Time & Temperature
• Use the TEMP arrows to set the temperature.
• Use the TIME arrows to set the time.
STEP 3: Begin Cooking
• Press center of dial to begin cooking.
ninjakitchen.ca 5