Publicité
Les langues disponibles
Les langues disponibles
EXTERNAL VIEW
Front view
Operator display
Printer cover
Receipt paper
Drawer
Drawer lock
PRINTER
Take-up spool
Paper bed
Print head release lever
4
All manuals and user guides at all-guides.com
The printer is one station type thermal printer, and therefore it does not require any
type of ink ribbon or cartridge. The average life of the printer is approximately 4
million lines.
When removing the printer cover, lift up its rear. When installing the printer cover,
hook it on the pawls on the cabinet and shut it.
Caution: Be very careful with the cutter which is mounted on the cover, so as
not to cut yourself.
Customer display
(Pop-up type)
Power cord
Mode switch
RS-232C connector cover
Print head release lever
The print head can be lifted off the roller by the print
head release lever (gray lever on the right side of the
printer). Pulling the lever toward you move the print
head away from the roller. If the paper becomes
jammed, you will need to use this lever to release the
print head from the paper so you can remove the
jammed paper.
Your register is shipped with the print head release
lever positioned at the lifted up position. Be sure to
push down the lever toward the paper bed side (printing
position) before you use the register.
Do not attempt to remove the paper roll
with the head in the down position. This
may result in damage to the printer and
print head.
Rear view
Keyboard
Publicité
