Sharp ER-A220 Manuel D'instructions page 48

Manual VAT 1-4 system (Manual entry method using programmed percentages)
Ñ
This system provides the VAT calculation for taxable 1 through 4 subtotals. This calculation is performed using
the corresponding programmed percentages when the
Manual VAT 1 system (Manual entry method for subtotals that uses VAT 1 preset percentages)
To use a programmed rate
Ñ
This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT 1
preset percentages when the
can be used.
Manual tax 1-4 system (Manual entry method using preset percentages)
Ñ
This system provides the tax calculation for taxable 1 through 4 subtotals. This calculation is performed using
the corresponding programmed percentages when the
After this calculation, you must finalize the transaction.
Automatic VAT 1 and automatic tax 2-4 system
This system enables the calculation in the combination with automatic VAT 1 and automatic tax 2 through 4. The
combination can be any of VAT1 corresponding to taxable 1 and any of tax 2 through 4 corresponding to taxable
2 through taxable 4 for each item. The tax amount is calculated automatically with the percentages previously
programmed for these taxes.
• A PLU not programmed for any of the tax statuses is registered depending on the tax status of
the department which the PLU belongs to.
• VAT/tax assignment symbol can be printed at the fixed right position near the amount on the
receipt as follows:
When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number
assigned to VAT/tax rate will be printed. For details, contact your authorized SHARP dealer.
Key operation example
(When the manual VAT 1-4
system is selected)
46
All manuals and user guides at all-guides.com
◊
◊
VAT rate
◊
key is pressed just after the
◊
VAT1/tax1
VAT2/tax2
VAT3/tax3
VAT4/tax4
ù
550
Ñ
◊
É
◊
key is pressed just after the
Ñ
key. For this system, the keyed-in tax rate
◊
key is pressed just after the
A
B
C
D
Print
Ñ
key.
Ñ
key.