Publicité
Les langues disponibles
Les langues disponibles
Before calling for service
10
The malfunctions shown in the left-hand column below, labelled "Fault," do not necessarily indicate functional
faults of the machine. It is therefore advisable to refer to the "Checking" shown in the right-hand column before
calling for service.
(1)
The display won't be illuminated even when
the mode switch is turned to any other
position than "
".
(2)
The display is illuminated, but the whole machine
refuses registrations.
(3)
No receipt is issued.
(4)
No journal paper is taken up.
(5)
Printing is unusual.
Error code table
When the following error codes are displayed, press the
below.
Error
code
E01
Registration error
E02
Misoperation error
E03
Undefined code is entered.
E07
Memory is full (in the
E11
Compulsory depression of the
finalization
E12
Compulsory tendering
E22
Overlapped cashier error
E23
Cashier resetting over error
E32
No entry of a cashier code
E34
Overflow limitation error
E35
The open price entry is inhibited.
E36
The preset price entry is inhibited.
E37
The direct finalization is inhibited.
E67
Subtotal void is not allowed.
All manuals and user guides at all-guides.com
Fault
Error status
`
key programming).
Ñ
key for direct
Checking
• Is power supplied to the electrical outlet?
• Is the power cord plug out or loosely connected to the
electrical outlet?
• Is a cashier code assigned to the register?
• Is the mode switch set properly at the "REG" position?
• Is the paper roll properly installed?
• Is there a paper jam?
• Is the receipt function in the "OFF" status?
• Is the print head release lever at the printing position?
• Is the take-up spool installed on the bearing properly?
• Is there a paper jam?
• Is the print head release lever at the printing position?
• Is the paper roll properly installed?
c
key and take a proper action according to the table
Action
Make a correct key entry.
Make a correct key entry.
Enter a correct code, or declare it by the programming.
`
Program the
key within 25 steps.
Ñ
Press the
key and continue the operation.
Make a tendering operation.
Make a cashier code entry.
Make a registration within a limit of entry.
Make a preset price entry.
Make an open price entry.
Make a tendering operation.
Finalize the transaction, and correct the wrong entries in the
void mode.
59
Publicité
