Simons Voss Technologies RouterNode 2 Guide Abrégé page 44

9. Reset
Reset system
configuration
44 / 176
Make a distinction between them:
Reset system configuration: Reset all system

settings (3060 or SmartIntego or MobileKey).
Reset network configuration: Reset all network

settings (IP address, DHCP settings, host name).
NOTE
IP address recovery
If the IP address is assigned by a DHCP server (default
setting), the DHCP server assigns the IP address again
directly after resetting (depending on settings of the
DHCP server).
1. Disconnect the power supply (round plug or net-
work cable for PoE).
2. Wait 20 seconds.
3. Press and hold the reset button.
4. Reconnect the power supply (round plug or net-
work cable for PoE).
RouterNode 2, GatewayNode 2,
SmartBridge
EN