Practical Applications - Metabo HPT C 12FDHB Instructions De Sécurité Et Mode D'emploi

English

PRACTICAL APPLICATIONS

WARNING:
Line
Warning sign
1. Switch operation
Trigger switch
Fig. 17
WARNING:
WARNING:
22
* To avoid personal injury, never remove or place a workpiece on
the table while the tool is being operated.
* Never place your limbs inside of the line next to warning sign
while the tool is being operated. This may cause hazardous
conditions (see Fig. 16).
The tool will not start unless the lock-off button is pressed
while the switch is pulled back.
The Lock-off button can be engaged by pressing it to right.
After the switch is on, the saw blade will continue to operate
as long as you pull on the trigger switch, even if you release
the lock-off button.
When the switch is released, the lock-off button
automatically disengages to prevent inadvertent motor
startup.
Lock-off button
To avoid injury, after completing a cut and releasing the trigger
switch, allow the blade to stop before raising the saw head.
Never lock the Lock-off button in depressed position.
Pulling back the switch would then cause the tool to suddenly
start operating, which could result in injury.
Fig. 16
Warning sign
Line