Applications; Preparation Before Operation - Metabo HPT C 12FDHB Instructions De Sécurité Et Mode D'emploi

English

APPLICATIONS

Wood and aluminum sash.

PREPARATION BEFORE OPERATION

Make the following preparations before operating the power tool:
1. Remove all packing materials attached or connected to the tool before attempting to operate
it.
2. Installation
9-23/32"
(247 mm)
11/32" (9 mm)
4 holes
10-7/32"
(259.75 mm)
Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.
Select 5/16" (8 mm) diameter bolts suitable in length for the thickness of the work bench.
Bolt length should be at least 1-9/16" (40 mm) plus the thickness of the work bench.
For example, use 2-9/16" (65 mm) or larger bolts for a 1" (25 mm) thick work bench.
12
9-23/32"
(247 mm)
10-7/32"
(259.75 mm)
Fig. 4
Base 5/16" (8 mm) bolt
Work bench 5/16" (8 mm) nut