Practical Applications - Metabo HPT C 3610DRA Instructions De Sécurité Et Mode D'emploi

English
Laser line
Counterclockwise Clockwise
Fig. 28-c

PRACTICAL APPLICATIONS

WARNING
● To avoid personal injury, never remove or place
a workpiece on the table while the tool is being
operated.
● Never place your limbs inside of the line next to
warning sign while the tool is being operated.
This may cause hazardous conditions (see
Fig. 29).
NOTE
Prior to operating the switch, make sure to check the
stability of the tool by setting the angle and turn to
conduct a trial cutting run without using a workpiece.
Line Warning sign
Warning sign Line
28
Pattern line
Fig. 29
1. Switch operation
LED light switch
ON/OFF
Trigger switch
Lock-off
button
Hole
(1) Turning the saw on
This miter saw is equipped with an ON/OFF trigger
switch (2). With the lock-off button pressed, squeeze
the trigger switch to turn the miter saw ON. Release
the trigger switch to turn the saw OFF.
(2) Turning the laser guide / LED light on
Press the laser switch to turn it ON, and press again to
turn it OFF.
Press the the LED light switch to turn it ON, and press
again to turn it OFF.
WARNING
Make the ON/OFF switch childproof. Insert a
padlock, or chain with padlock, through the
hole in the trigger and lock the tool's switch,
preventing children and other unqualifi ed users
from turning the machine on.
2. Using the Vise Assembly (Standard accessory)
Vise shaft
Vise lock
knob
Fence
Laser switch
Fig. 30
Knob
Vise plate
Workpiece
Fig. 31