Travis Industries ProBuilder GSB2 42 Manuel Du Propriétaire page 12

12

Retirez le cadre en verre en suivant les instructions ci-dessous.
Open the four latches holding the glass frame in place (start
a
with the bottom) - follow the directions shown to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it should
be parallel with the front of the fireplace when installed.
© Travis Industries
Entretien
NOTE:
You may need to lift
the glass frame
while re-attaching.
Pièce de remplacement en verre #
42 ProBuilder
72 ProBuilder
4170630
Pliers may be used
Latch
Catch
(on glass frame)
270-01990
270-01992
Top of
Firebox
Glass
100-01451-FR