Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 2.5
FUNCTIONS
The Drill Bit Sharpening Jig will sharpen drill bits from 5/64 to 1/2 in. with any power drill operating
between 2,000 and 3,500 RPM
SAFETY
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator must follow basic
precautions to reduce the risk of personal injury and/or damage to the equipment. Before allowing
someone else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover
all possible conditions and situations that may occur. Common sense and caution are factors that
cannot be built into this product, but must be supplied by the operator.
NOTE: Keep this manual for safety warnings, precautions, operating, inspection and
maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean and well lit.
2.
Do not use in the presence of flammable gases or liquids.
3.
Keep anyone not wearing the appropriate safety equipment away from the work area.
4.
Minimize distractions in the work environment. Distractions can cause you to lose control
of the tool.
5.
Store tools properly in a safe and dry location to prevent rust or damage.
6.
Always lock up tools and keep them out of the reach of children.
For technical questions call 1-800-665-8685
Drill Bit
Sharpening Jig
8089591
3
Publicité
Table des Matières
