Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8089591
UNPACKING
1.
Carefully remove the parts and accessories from the box. Retain packaging material until you
have carefully inspected and satisfactorily installed or operated the tool.
2.
Make sure that all items in the parts list are included.
3.
Inspect the parts carefully to make sure the tools and accessories were not damaged
while shipping.
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating.
Failure to do so could result in a malfunction and serious personal injury.
PARTS IDENTIFICATION
Contents:
•
Drill Bit Sharpening Jig
OPERATION
CAUTION! Wear suitable eye protection when operating this tool.
1.
Mount the tool to a workbench or other stable surface for easy operation
and stability.
2.
Place the drill bit in the correctly sized drill guide.
3.
Do not begin sharpening until the drill has been running at full speed
(between 2,000 and 3,500 RPM) for at least 2 seconds.
4.
Ensure that the drill bit is parallel to the grinding stone and held firmly in
place with your thumb. See image below for correct procedure.
5.
Steadily push the drill bit towards the grinding stone while keeping the
drill bit level.
CAUTION! Do not use excessive force. This will create a rounded
cutting edge on the drill bit.
Visit www.princessauto.com for more information
Drill Bit Sharpening Jig
V 2.5
5
Publicité
Table des Matières
