Lubrication - Power Fist 8900771 Mode D'emploi

8900771
6. When servicing, use only identical replacement parts. Only use
accessories intended for use with this tool. Replace damaged parts
immediately.
7. Maintain the tool's label and name plate. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Wipe external surfaces of the winch with a clean cloth after each use.

LUBRICATION

1. Inspect and lubricate the tool when required.
2. Lubricate the cable and hook with light grease after the first 20 hours
of operation.
3. Lubricate the gears every 6 months.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Cranking difficult or impossible.
Gear deviation
Cable or strap worn
8
Worm Gear Hand Winch
Possible Cause(s)
Overloaded.
1. Overused.
2. Gear worn.
Overused
For technical questions call 1-800-665-8685
Suggested Solution(s)
Use a heavier winch.
1. Use a new winch.
2. Use a new winch.
Use a new cable or strap.
V1.0