Hitachi YUTAKI S80 Serie Manuel D'instructions page 18

ELECTRICAL AND CONTROL SETTINGS
Model Power supply
DHWS200S-2.7H2E
1~ 230V 50Hz
DHWS260S-2.7H2E

Extension cables (supplied with the ATW-FWP-02 accessory. Only for installation of the DHW tank
beside the indoor unit)
When the domestic hot water tank is installed beside the indoor unit, it is needed to extend the cables up to the terminal board 2
(TB2) of the indoor unit, which is placed at certain distance from the tank. These cables are the following:
Model Power supply
DHWS200S-2.7H2E
1~ 230V 50Hz
DHWS260S-2.7H2E
10 PMML0344B rev.2 - 01/2021
Unit controller
Maximum
connection cable size
current
(A)
EN60335-1
8.7 6 x 0.5 mm x 1.8m
2
Extension cable for the electric heater
Extension cable for the thermistor
Extension cable for the LCD controller
Unit controller
Maximum current
extension cable size
(A)
EN60335-1
8.7 6 x 0.5 mm
Electric heater
connection cable size
EN60335-1
3 x 2.5 mm x 1.8m
2
Electric heater
extension cable size
EN60335-1
x 3.5m 3 x 2.5 mm x 3.5m
2 2
Thermistor connection
cable size
EN60335-1
2 x 0.3 mm x 2.0m
2
Thermistor extension
cable size
EN60335-1
2 x 0.3 mm x 3.5m
2