Application; Technical Characteristics; Mounting / Installation - PR electronics 5335 Mode D'emploi

Masquer les pouces Voir aussi pour 5335:

Table des Matières

Les langues disponibles

2-WIRE TRANSMITTER

WITH HART

PRetop 5335

• RTD, TC, Ohm, or mV input

• Extremely high measurement accuracy

• HART

communication

• Galvanic isolation

• For DIN form B sensor head mounting

Application:

• Linearised temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or

TC sensor.

• Difference or average temperature measurement of 2 resistance or TC sensors.

• Conversion of linear resistance variation to a standard analogue current

signal, for instance from valves or Ohmic level sensors.

• Amplification of a bipolar mV signal to a standard 4...20 mA current signal.

• Connection of up to 15 transmitters to a digital 2-wire signal with HART

communication.

• Within a few seconds the user can program PR5335 to measure temperatures

within all ranges defined by the norms.

• The RTD and resistance inputs have cable compensation for 2-, 3- and 4-wire

connection.

• Continuous check of vital stored data for safety reasons.

• Sensor error detection according to the guidelines in NAMUR NE 89.

• For DIN form B sensor head mounting. In non-hazardous areas the 5335 can

be mounted on a DIN rail with a special fitting.

• NB: As Ex barrier for 5335B, C and D we recommend 5106B.

PROTOCOL

Table des Matières