Safety Instructions; Declaration Of Conformity - PR electronics 5335 Mode D'emploi

Safety instructions

Ex / I.S. installation:
For a safe installation of 5335B, C and D in hazardous area the following must
be ob served. The module must only be installed by qualified personnel who
are familiar with the national and international laws, directives and standards
that apply to this area.
Year of manufacture can be taken from the first two digits in the serial number.
For installation requirements and Ex / I.S. data see ATEX certificates.
16

DECLARATION OF CONFORMITY

As manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hererby declares that the following product:
Type: 5335
Name: 2-Wire transmitter with HART
is in conformity with the following directives and standards:
EMC directive 2004/108/EC and later amendments
EN 61326
This declaration is issued in compliance with article 10, subclause 1 of the EMC
directive. For specification of the acceptable EMC performance level, refer to
the electrical specifications for the module.
The ATEX directive 94/9/EC and later amendments
EN 50014, EN 50020, EN 50021,
EN 50281-1-1 and EN 50284
ATEX certificate: KEMA 03ATEX1508 X (5335A)
ATEX certificate: KEMA 03ATEX1537 X (5335B, C and D)
Notified body for CENELEC/ATEX: UL International Demko A/S 0539
Rønde, 17 Nov. 2005
®
protocol
Peter Rasmussen
Manufacturer's signature
17