Notes On Operating Under Mfx; Multiple Unit Combination With The Central Station 3 Under Mfx - Minitrix 996 Ulmer Spatz Serie Mode D'emploi

Notes on operating under mfx

• No address is required under mfx; each decoder receives
a non-recurrent and unique identifier (UID).
• The decoders register automatically at a Central Station
or Mobile Station with their UID and their name.
• Name ex works: Ulmer Spatz VB1
Ulmer Spatz VB2
• The settings for the decoders can be programmed using
the graphic interface on the Central Station or it can also
be done partially with the Mobile Station.
CV Discription
1 Address
8 Reset
17 Extendet address (upper part) (CV 29, Bit 5=1)
18 Extendet address (lower part) (CV 29, Bit 5=1)
Bit 0: Travel direction polarity reversal
Bit 1: number of speed levels 14 – 28/126
29
Bit 2: analog operation on/off
Bit 5: address size 7 Bit / 14 Bit

Multiple Unit Combination with the Central Station 3 under mfx

Call up the locomotive menu in the Central Station 3 and
select „Create M.U. Combination". Assign a unique name
for the M.U. combination and then drag the desired unit
from the locomotive list into the open field. After you have
confirmed the selection, the M.U. combination will appear in
the locomotive list with the image of the lead unit.
General Note to Avoid Electromagnetic Interference:
A permanent, flawless wheel-rail contact is required in
order to guarantee operation for which a model is designed.
Do not make any changes to current-conducting parts.
Factory
DCC Value
Setting
1 – 127 3
8 131
0 – 255 192
0 – 255 0
0 – 255 6
7