Grounding Clamps Connections; Installation Of Torch Consumables - Magmaweld ID 500 TW DC PULSE Mode D'emploi

ID 500 TW DC PULSE
• Adjustable Pedal Connection; It should be secured to the pedal socket with the ends 3-4-5-6.
(3) Soldering direction has been taken as the reference.
• Insert the grounding clamps cable plug (a) into the positive terminal socket and tighten it by turning right.

2.5.4 Grounding Clamps Connections

• To improve the welding quality, firmly connect the grounding pliers (b) to the workpiece as close as possible to
the welding area.
a
b
• The ceramic gas nozzle (5) and the tungsten electrode (1) must be selected according to the operating current

2.5.5 Installation of Torch Consumables

and the shape of the workpiece. Accordingly, the diameters of the clamp (3) and the clamp holder (4) must
match with the diameter of the tungsten electrode.
• Remove the clamping cap (2).
• Remove the existing electrode from the electrode clamp and match the diameter of the new tungsten electrode.
• Secure the collect to the torch.
• Secure the clamping cap firmly head firmly.
4
5
Figure 2 : Installation of Torch Consumables
www.magmaweld.com
1
3
USER MANUAL | MANUEL D'UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
Installation 17
EN