Listening To Fm Broadcasts - SOUNDMASTER UR8200 Mode D'emploi

Selecting FM mode
1. Press the „POWER" button (13) to turn the radio on.
2. Press the „SOURCE" button (8) to select the FM mode. The FM mode indicator shows on
the display.
Scanning for FM stations
•
In FM mode, press the „SCAN" button (1) to activate the automatic search for the next
available FM station.
•
After a strong FM radio station is detected, the search stops. The FM radio station is
broadcast.
Tuning the FM frequency
•
In FM mode, press the ◄◄ or ►► button (10 or 11) to tune down or up the frequency.
•
Once you have tuned up or down the frequency, press the „SCAN" button (1) to activate
the automatic search for the next available FM station in the selected tune up or down
direction.
Storing preset stations
You can store up to 10 FM stations as preset stations.
1. Tune to an FM station.
2. Press and hold the „PRESET" button (2) until "EMPTY 1" (or the next available preset
number) shows on the display.
3. Press the ◄◄ or ►► button (10 or 11) to select a preset number.
4. Press the „SELECT" button (6) to confirm.
The FM station is stored with the selected preset number.
Repeat steps 1-4 to store more preset stations.
5. To tune to a preset station, press the „PRESET" button (2) once, then press the ◄◄ or
►► button (10 or 11) to cycle through the list of preset stations and then press the
„SELECT" button (6) to confirm the selection.
To change the FM station assigned to a preset number, repeat steps 1 to 4 above to overwrite
the existing FM station.
Displaying RDS information
Radio Data System (RDS) is a service that allows FM stations to transmit additional information.
When you tune to an FM radio station that transmits RDS signals, the station name is displayed.
Press the „INFO" button (9) repeatedly to cycle through the following RDS information (if
available).
•
Radio text
•
Program type (such as NEWS, SPORT, POP M)
•
Program service
•
Time
•
Date

LISTENING TO FM BROADCASTS

UR8200 / English Instruction Manual
5