SOUNDMASTER UR8200 Mode D'emploi page 17

Using the DAB menus
In DAB mode, press and hold the „MENU" button (9) to access the DAB menus.
Press the ◄◄ or ►► button (10 or 11) to cycle through the below options.
• FULL SCAN
• MANUAL
• DRC
• PRUNE
• SYSTEM
See below for details of each option.
FULL SCAN
Full scan is used to perform a wide range search for DAB stations.
• Press the „SELECT" button (6) to start scanning for available DAB stations.
• After the scanning is complete, the first detected station is broadcast automatically.
MANUAL
Press the „SELECT" button (6) to confirm the selection "MANUAL".
Press the ◄◄ or ►► button (10 or 11) to select the frequency manually. Press the
"SELECT" button (6) to tune the selected frequency.
DRC (Dynamic Range Control)
DRC adds or removes a degree of compensation for the differences in the dynamic range
between radio stations.
1. Press the „SELECT" button (6) to confirm the selection "DRC".
2. Press the ◄◄ or ►► button (10 or 11) to cycle through the below options.
•
DRC OFF: No compensation applied.
•
DRC LOW: Medium compensation applied.
•
DRC HIGH: Maximum compensation applied.
3. Press the „SELECT" button (6) to confirm the selected option.
PRUNE
This feature removes any stations that are in the list but have no service in your area.
1. Press the „SELECT" button (6) to confirm the selection "PRUNE".
2. Press the ◄◄ or ►► button (10 or 11) to cycle through the below options.
•
N: Return to the previous menu.
•
Y: Remove invalid stations from the station list.
3. Press the „SELECT" button (6) to confirm the selected option.
SYSTEM
See chapter "System menu" for details.
UR8200 / English Instruction Manual
4