Getting Started - SOUNDMASTER UR8200 Mode D'emploi

Connecting to power
1. Connect the cord of the power
adapter to the DC IN jack of the
radio.
2. Connect the plug of the power
adapter to a wall socket.
The radio is powered and in standby
mode when you see the display is
switched on.
To completely disconnect the radio from
power, remove the plug of the power
adapter from the wall socket.
Setting the clock
The date and time of the radio is automatically set once it receives radio broadcast signals (and
when such info is available). You may also set the date and time through the setting menu. To
do so:
Press the "POWER" button (13) to turn the radio on.
Press and hold the MENU button.
Press the ◄◄ or ►► button (10 or 11) until you see "SYSTEM" on the display and then
press the „SELECT" button (6) .
Press the ◄◄ or ►► button (10 or 11) until you see "TIME" on the display and then
press the „SELECT" button (6).
Press the ◄◄ or ►► button (10 or 11) until you see "SET TIME" on the display and
then press the „SELECT" button (6).
Press the ◄◄ or ►► button (10 or 11) to set hour time and then press the
„SELECT" button (6) to confirm.
Repeat step 6 to continue setting minute time, date, month and year.
For more date and time settings, see chapter "Time".
Using the antenna
Unroll and extend the antenna to improve FM signal reception.
Controlling the volume
Press the VOLUME UP (15) or VOLUME DOWN (14) button to adjust the volume.
Selecting DAB mode
Press the „POWER" button (13) to turn the radio on.
Press the „SOURCE" button (8) to select DAB mode. The DAB mode indicator shows
on the display.

GETTING STARTED

LISTENING TO DAB BROADCASTS
UR8200 / English Instruction Manual
2