SOUNDMASTER UR8200 Mode D'emploi page 23

UR8200 / English Instruction Manual
"Software Version (SW VER)"
This option displays the current software version.
Charging external device
Connect an external device (e.g. smartphone, mp3 player) via a USB cable (not provided) to the
USB jack on the back of the radio for charging. The radio cannot access the contents in the
connected external device.
Resetting the device
If the device does not respond or exhibits erratic or intermittent operations, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
microcontroller to shut down automatically. If this occurs, disconnect the AC power adaptor from
the wall socket. Wait at least 3 minutes, and re-attach the AC cord to the wall outlet. The device
is now reset, and you will need to set up the unit time and alarm again.
Care and maintenance
• Clean the radio with a soft damp cloth and let all parts dry completely after cleaning.
• Do not use any aggressive cleaners, brushes with nylon bristles, sharp or metallic cleaning
utensils, knives, hard scrapers and the like. They could damage the surfaces of the radio.
• Do not immerse the radio in water and do not let water getting into the housing of the radio.
Storage
• Unplug the power adapter and clean the radio before storage.
• Always store the radio in a dry and clean place.
Technical changes and misprints reserved
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.soundmaster.de
Duplication only with the permission of Woerlein GmbH
10