SOUNDMASTER UR8200 Mode D'emploi page 16

Scanning for DAB stations
The first time you use the radio, or if the station list is empty, the radio automatically performs a
station search. You may also perform a station search manually. To do so:
• In DAB mode, press the „SCAN" button (1) to activate the automatic station search.
The radio automatically stores radio stations with sufficient signal strength.
After the search is complete, the first stored station is broadcast automatically.
Tuning to a DAB station
In DAB mode, the ◄◄ or ►► button (10 or 11) to cycle through the DAB stations in the station
list.
Storing preset stations
You can store up to 10 DAB stations as preset stations.
Tune to a DAB station.
Press and hold the „PRESET" button (2) until "EMPTY 1" (or the next available preset
number) shows on the display.
Press the ◄◄ or ►► button (10 or 11) to select a preset number.
Press the „SELECT" button (6) to confirm.
The DAB station is stored with the selected preset number.
Repeat steps 1-4 to store more preset stations.
To tune to a preset station, press the „PRESET" button (2) once, then press the ◄◄ or
►► button (10 or 11) to cycle through the list of preset stations and then press the
„SELECT" button (6) to confirm the selection.
To change the DAB station assigned to a preset number, repeat steps 1 to 4 above to overwrite
the existing DAB station.
Displaying DAB information
Press the „INFO" button (9) repeatedly to cycle through the following information (if available).
•
Dynamic label segment (DLS)
•
Signal strength
•
Program type (PTY)
•
Ensemble name
•
Frequency
•
Signal error rate
•
Bitrate codec
•
Time
•
Date
UR8200 / English Instruction Manual
3