Console Instructions; Mode Options - SPORTSTECH RSX300 Mode D'emploi

A. LCD full display

Mode Options

B. Function List
Function Display
Switch Display
1 SCAN
every 6 seconds
0:00~99:59
2 TIME
(minute: second)
3 STRD 0~9999 HITS
4 DIST 0,00-999,9km
0,0~999,9
5 CAL
Kilocalories
6 RPM 0~9999
C. Power On/Off:
Power ON
1. Power on and LCD full display for 1 second, enter then SCAN mode
2. Without signal input within 4 seconds, time pauses and will then switch to STAND BY mode
Power OFF
1. Without signal input within 4 minutes, IC enters SLEEP mode
2. The console WAKES UP when there is an input signal or when button is pressed.

CONSOLE INSTRUCTIONS

0:00
SCANTIME
Brief Description
Displays order TIME> COUNT> T.COUNT> CAL> RPM
Under SCAN mode, press MODE key for further options.
Counts up till 99:59 then returns to 0:00.
Counts up till 9999 then returns to 0.
Shows the distance covered.
Count up till reach 9999 then returns to 0.
Revolutions per minute: Displays the value when there is a
signal input. Returns to 0 within 4 seconds when there is no
sensor input.
39
EN