Battery - SPORTSTECH RSX300 Mode D'emploi

D. Instructions
1. After the power is on (or press MODE/POWER for 3 seconds) LCD full display for 1 second and enter
than the SCAN mode
2. After entering RPM value, each function starts collecting data (TIME COUNT TOTAL COUNT CAL
RPM)
3. If RPM input stops then each function stops counting, the console in on pause and displays STOP
E. Button Function Description
MODE:
1. Switch between different modes pressing each button. During SCAN mode, the screen will stay on
the current function.
2. If you press the button for 3 seconds you will return to 0 (Reboot to clear all other data than T.
COUNT)
3. APP connection via Bluetooth
HOW TO REPLACE THE COMPUTER BATTERIES
1. Open the battery compartment on the back of the console
2. Use two 1.5v AAA batteries as a power source.
+
–
BATTERY HANDLING INSTRUCTIONS
• Replace the batteries if the display is dim or illegible.
• When inserting, pay attention to the polarity (+) and (-) of the batteries as well as the correct positio-
ning so that the connections are properly seated.
• Do not mix old and new batteries or different types of batteries.
• Remove the batteries if they are weak or if you are not going to use the device for a long period
of time to avoid risk of the batteries leaking.
• Do not charge, disassemble or throw batteries into fire. There is a serious risk of explosion!

BATTERY

40