Protect Your Home; Extension Leads Eu/Uk; Main Features; Preparation - WAGNER SteamForce Pro Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
EN

7. Protect your home

To prevent marks from steam on carpets and soft furnishings it is recommended the
unit be placed on a hard flat board. Ensure the unit will not slip or tilt. Dust sheets and
newspapers are not suitable.
Supply cord must be connected to a grounded (3 prong) mains socket-
outlet.
Arrange replacement of a worn or damaged supply cord.
NEVER repair a supply cord.
Removal of grounding pin VOIDS Guarantee.

8. Extension Leads EU/UK

If you are using an extension lead it must be rated at a minimum of 15 Amps (EU) / 13
Amps (UK) - 230V unit and fully unwound. Do not operate with an extension lead rated
less than 15 Amps / 13 Amps as this will cause premature failure of the element which is
not covered by the Guarantee.

9. Main Features

WAGNER Steamers are professional, fast-action steam wallpaper strippers. They have
many added features:
Each tank is individually pressure-tested.
Storage for the hose and supply cord.
Neon mains ON/OFF switch.
Cooler running steam hose.

10. Preparation

To achieve fast paper removal always gently score the areas to be
stripped. With heavily embossed, vinyl-coated or painted papers this
is essential. Either use a proprietary perforator tool or alternatively
score the paper with the edge of a wall scraper in a 'criss-cross'
pattern with 150mm (6 inch) spacing (Fig. 1, A).
As with all decorating work be sure to protect carpets and furniture
with covers.

11. Operation

Place the unit on a flat surface near the area to be stripped and remove the steamplate.
Fully uncoil the hose and supply cord.
Connect the thread on the steamplate to the end of the hose. This only needs to be
8
SteamForce Pro

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Steamforce pro 230v

Table des Matières