Programmed Recording
Set a recording start and stop time. Or,
set a 5 or 10 second interval recording
to be done each minute.
REC TIME :
*1 Record 5 seconds each minute.
*2 Record 10 seconds each minute.
03.L354K Basic p17-19
Camera Recording
Before you begin...
• Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
• Insert cassette with record tab (page 11).
• Set POWER to CAMERA.
1
Press MENU for MENU
mode. Press UP or
1
2
3
DOWN to select
,
,
PROGRAMMED REC
2
Press M.FOCUS.
(Current time is
displayed.)
Each additional press
of M.FOCUS increases
start time by 30 minutes.
3
Press DOWN to select
REC TIME
4
Press M.FOCUS
repeatedly to select one
of the options shown at
left.
To cancel the setup, press MENU twice.
4
Press RECORD/PAUSE
to place Camcorder in
stand-by mode.
Recording will be done as scheduled.
Note:
• Start time may not be set over 24 hours from
current time.
• Camcorder shuts off at tape end, or 12 hours
after Interval Recording starts.
• To cancel, set POWER to OFF.
19
.
.
04.1.6, 0:23 PM
19