Using Menu Mode - Panasonic Palmcorder PV-L354-K Mode D'emploi

1 2 3 4
, , ,
Camera Mode Menu Screen
1
2
3
4
5
6
7
8
9
10
VCR Mode Menu Screen
3
6
7
02.L354K Getting p9-16

Using MENU Mode

Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA or VCR.
1
Press MENU for MENU mode.
The CAMERA or VCR MENU screen (see below
left) appears when Menu mode is entered.
2
Press UP or DOWN to highlight the
desired menu item.
3
Press M.FOCUS to set selection.
4
Press MENU to exit.
Note:
• The Menu mode is cancelled if UP/DOWN,
M.FOCUS, or MENU are not pressed within 5 minutes
when Self Demo mode is off with no cassette tape
and/or battery inserted.
• The Menu mode is cancelled if UP/DOWN,
M.FOCUS, or MENU are not pressed within 30
seconds when Self Demo mode is on with no cassette
tape and/or battery inserted.
1
REC MODE (page 17).
Change to desired tape speed, SP/SLP.
2
SHUTTER (page 25).
Select desired shutter speed.
3
LCD BRIGHT (page 17).
LCD BRIGHT SETTING sub menu is displayed.
Adjust LCD monitor brightness level.
4
DIGITAL EFFECTS (pages 26~28, 30).
DIGITAL EFFECTS sub menu is displayed.
To select DIGITAL ZOOM,
MOTION DETECTION, or FADE.
5
PROGRAMMED REC (page 19).
Camcorder starts and stops recording at a
preset time.
6
DISPLAY SET (pages 31, 32).
DISPLAY SET sub menu is displayed.
To select DISPLAY or MODE SELECT.
7
CLOCK SET (pages 14, 15).
CLOCK SET sub menu is displayed.
Set the Date and Time.
8
STAND-BY RELEASE (page 18).
ON : Enables quick resumption of recording
from Stand-by mode.
9
LIGHT MODE (page 16).
OFF/ON
OFF/ON/AUTO : Light can be set ON, OFF, or AUTO.
10
SELF DEMO (page 7).
ON : SELF DEMO screen is displayed.
13
: Light can be set ON or OFF.
04.1.6, 0:22 PM
13