Panasonic Palmcorder PV-L354-K Mode D'emploi page 18

Camera Recording
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
B
a b c
Manual Easy Editing
For proper continuity when taping from Stop
mode or after attaching a new Battery.
A
Set POWER to VCR.
B
a Press (REWIND/SEARCH) to
rewind a few seconds of tape.
b Press (PLAY/STILL) to review
recording.
c Press (PLAY/STILL) at the
point where you will want to continue
the recording.
C
Set POWER to CAMERA.
D
Press RECORD/PAUSE to resume
recording.
18
03.L354K Basic p17-19
Stand-by Quick Release
If left in RECORD/PAUSE mode for 5
minutes, the Camcorder switches to
Stand-by mode to conserve battery power.
When set to ON, Stand-by Quick Release
lets you resume recording by pressing
RECORD/PAUSE twice. The default
setting from the factory is OFF mode.
2 3 4
, ,
1
Set POWER to
CAMERA.
2
Press MENU for
MENU mode.
Press UP or DOWN to select
STAND-BY RELEASE
3
Press M.FOCUS to select ON or OFF.
ON : From Stand-by mode, press
1
A C
, , ,
b c
,
OFF : From Stand-by mode, set
D
,
a d
,
4
Press MENU to exit.
Easy Edit Stand-by
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
a
Press RECORD/PAUSE to stop
recording.
b
Set POWER to OFF and leave
cassette in Camcorder.
c
To resume recording, set POWER to
CAMERA.
d
Press RECORD/PAUSE to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than
24 hours has passed before recording
was resumed.
18
.
RECORD/PAUSE two times to
resume recording.
POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
04.1.6, 0:23 PM