Technical Data - Schellenberg ROLLODRIVE 35 Mode D'emploi

According to EN 13659, it must be ensured that the displacement requirements as
per EN 12045 are met. When unrolled, the displacement at the lower edge must be
at least 40 mm at an upward-directed force of 150 N. It must be ensured that the
travel speed of the hanging must be less than 0.2 m/s in the last 0.4 m.

technIcal Data

Power supply unit operating voltage
rated power
standby power
Power supply unit
torque
max. speed
max. tensile force /
initial tensile force
Final tensile force
short-time operation
Protection class
enclosure rating
Positioning accuracy
number of switching times
automatic solar control
setting range
Permissible ambient temperature
230 v / 50 hz
29 w
< 0.7 w
24 v Dc / 1.2 a
mdn = 2,5 nm
34 rpm
16 kg
7 kg at belt
5 minutes
III
IP 20 (for dry rooms only)
5 mm
2 (uP and Down)
3,000 bis 10,000 lux
0-40 °c
15
GB