EUROM Alutherm Wi-Fi 1000 Manuel De L'utilisateur page 37

Deleting weekly timer setting
1. Press and hold the WEEK button until 01 appears on the screen.
2. Go past 01- ][ and on/off first by pressing SET briefly.
3. When the number of the timer setting that you wish to change appears, press SET for a
little longer. You will hear a short beep and the selected setting has been deleted.
4. If you wish to delete all timer settings, press the WEEK button and hold. Press and hold
the MOD and SET buttons at the same time, until you hear a beep. The screen will show
88:88, indicating that all settings have been deleted.
ECO mode
The remote control has an ECO button for an energy-efficient mode; the device maintains the
room temperature at 16°C.
1. Press the ECO button to activate; EC appears on the screen.
2. Press the ECO button to deactivate.
If the heater is working in ECO mode and a timer setting becomes active, the device will start
to work according to the timer setting. When the timer setting ends and the device goes off,
the device will not return to the ECO mode.
Eurom Smart App
CAUTION
Do not use the weekly timer created on the device at the same time as the
weekly timer created by the Eurom Smart app. Timer settings created by the
Eurom Smart app are not visible on the device display. Timer settings created
on the device are not visible in the Eurom Smart app.
The device can be operated using an app on a smartphone or tablet. The Eurom Smart app
can be used:
•
to switch the device on and off (without anticipation);
•
regulate the temperature and capacity;
•
set the ECO setting.
The app can also be used to set twenty on and off timer settings daily, on the weekly timer.
1. Open the Eurom Smart App manual with the
QR code (Figure 18) or go to
www.eurom.nl/nl/manuals.
2. Complete the Eurom Smart App manual.
•
When the device is connected with Wi-Fi, the
Wi-Fi symbol appears on the screen.
•
If the Wi-Fi symbol is blinking there is no
connection.
Figure 18
37