EUROM Alutherm Wi-Fi 1000 Manuel De L'utilisateur page 32

7. Lay the device down on a soft steady surface
(Figure 11, pos. 4).
8. Screw and tighten two brackets (Figure 11,
pos. 1) on both sides of the main body
(Figure 11, pos. 5) with a small screw
(Figure 11, pos. 2) using a Phillips screwdriver
(Figure 11, pos. 3).
Figure 12
9. Place the bracket holes (Figure 12, pos. 4) over the wall brackets (Figure 12, pos. 1).
10. Let the device (Figure 12, pos. 2) drop into the openings of the wall brackets (Figure 12,
pos. 1).
11. Use the device brackets (Figure 12, pos. 3) to mark the bottom hole position on the wall.
12. Remove the device from the wall brackets (Figure 12, pos. 1).
32
Figure 11