Remote Control - EUROM Alutherm Wi-Fi 1000 Manuel De L'utilisateur

LED display
The LED display will go dark if no adjustments are
made for 2 minutes. The LED display will light up
again when you press a button.
Status indication (Figure 5, pos. 1):
•
The 3 suns indicate whether the heater is set
to low, medium or high capacity.
•
The Wi-Fi symbol indicates if there is a Wi-Fi
connection.
•
The "P" indicates that the program function is
active.
•
The "M" indicates that the manual function is
active.
Temperature indication (Figure 5, pos. 2):
•
SET indicates that a day or time can be set.
•
ON indicates that the heater is switched on.
•
OFF indicates that the heater has been switched off by the stand-by button or the
tipping safeguard.
•
Temperature shown in degree Celsius.
Time indication (Figure 5, pos. 3):
•
Time shown in 24-hours format.
Day indication (Figure 5, pos. 4):
•
Number corresponds with the day of the week: 1 = Monday, 2 = Tuesday, and so on.

Remote control*

1. ON/OFF button
2. SET button
3. Circle plus button
4. Circle minus button
5. Minus button
6. WEEK button
7. Plus button
8. Heat capacity button
9. ECO button
10. MODE button
*Batteries not included
Figure 5
Figure 6
27