EUROM Alutherm Wi-Fi 1000 Manuel De L'utilisateur page 36

Weekly timer setting
1. Make sure the device is set to program function.
2. Press and hold the WEEK button until 01 appears on the screen.
3. Use the plus and minus button to choose the desired setting:
•
01 – one-off setting (must fall in the current week).
•
][ – every week setting.
4. Confirm with the SET button; ON appears blinking on the screen.
5. Use the plus and minus button to choose the desired anticipation setting:
•
ON – the heater will anticipate the temperature 20 minutes before it is set. If it needs to
be heated, the heater will heat with high capacity in order to heat the room to the
desired temperature by the activation time.
•
OFF – the heater will not anticipate the temperature and will turn on at set time.
6. Confirm with the SET button, 01 SET ON appears on the screen.
7. Use the plus and minus buttons to select:
•
the desired day, confirm with the SET button;
•
the desired temperature, confirm with the SET button;
•
the desired hours, confirm with the SET button;
•
the desired minutes, confirm with the SET button.
8. 01 SET OFF will appear on the screen; repeat step 7 to indicate the deactivation time.
9. 02 appears on the screen, there are two options:
•
Set next activation and deactivation times, repeat step 7 and 8 for every desired time.
Make sure the timer settings do not contradict each other: maximum 28 per week,
maximum 4 per day.
•
If you are done setting the activation and deactivation times, wait till screen returns to
standard settings.
10. The screen will show P and the device will automatically switch on and off at the set
time.
View weekly timer setting
1. Press repeatedly on WEEK. You will see the following timer settings, one after the other:
•
one-off or repeated;
•
anticipation on or off;
•
temperature setting;
•
timer on-time;
•
timer off-time;
•
next timer setting.
Turning off weekly timer setting
1. Press and hold the WEEK button until 01 appears on the screen.
2. Press and hold the MOD until TIME disappears from the screen to indicate that the data
will be retained but will not be active. By pressing MOD again until TIME appears, you
will reactivate the timer.
36