I-Tech T-ONE EVO I Mode D'emploi page 37

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The picture above is only used as demonstration and it not represent exactly the
specifications of program S10 Endurance
A bar indicating the start and end of a contraction will appear on the display whilst the
electronic stimulator is working. The periods of muscular contraction (bold bar) and the periods
of recovery (striped bar) are graphically visualised under the bar with a cursor. This enables
the user to know exactly when a contractions starts.
8.
At the end of the first phase, the T-ONE cancels the previously selected intensity, and
warns the user with an intermittent signal; to continue with the program, press the
for the relevant channels again until you reach the desired level of stimulation.
An audio signal will sound three times when the program has finished.
9.
At the end of the program switch off the T-ONE and remove the cables. Attach the
electrodes to the transparent films and replace them in their original packaging.
Option to simultaneously increase the intensity on all channels:
Select the desired program:
Start program
Increase each channel to at least intensity 1:
CH1
Blue
To simultaneously increase the intensity of all channels use the following buttons:
Increase
IACER SRL
CH2
Yellow
CH3
Red
Decrease
CH4
White
MNPG05-08 Ed. 12/10/10 Pag. 35
button

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T-one evo ii

Table des Matières