Warning: The veins in the IV Arm, lower legs and Pneumothorax
Bladder contain latex. Users who suffer from latex allergy should
take precautions while using or handling the latex parts by wearing
non-latex protective gloves.
Do not use the Patient Simulator if:
–
Limbs are not attached to the torso
–
Skins are torn or not properly fastened
–
Internal or external cables, tubes or connectors are damaged
–
There is fluid leakage inside the Patient Simulator torso
–
There are unusual sounds indicating air leakage or mechanical
damage
–
There are signs of electrical malfunction, such as an unresponsive
Patient Simulator, an unusual smell or smoke
Hygiene
–
To maintain Patient Simulator skins, wash hands before use and
place the Patient Simulator on a clean surface.
–
Wear gloves as required during simulation scenarios.
–
Use only Laerdal Airway Lubricant in the Patient Simulator's
airway. Do not spray airway lubricant into the Patient Simulator.
Lubricate airway adjunts only.
Prevent Stains on Patient Simulator Skins
Avoid using colored plastic gloves, as they may cause discoloration of
the Patient Simulator skin.
Do not use felt-tipped markers, ink pens, acetone, iodine or other
staining medications near the Patient Simulator. Take care not to
place the Patient Simulator on newsprint or colored paper. Staining
may be permanent.
Latex
The veins in the IV Arm and in the lower legs and Pneumothorax
Bladder contain latex. Users who suffer from latex allergy should
take precautions while using or handling the latex parts by wearing
non-latex protective gloves.
Antivirus and Firewalls
The Patient Simulator and PCs are not supplied with Antivirus pro-
grams. Windows firewall is activated by default. It is the customer's
responsibility to protect the simulation system components from
unauthorized access.
The Patient Simulator will revert to factory settings each time the
power is switched off.
The customer should install all recommended Windows updates
from Microsoft. General security measures should be taken before
browsing the internet.
It is recommended that the Instructor PCs are used only as Patient
Simulator controllers. Downloading other Software programs onto
these machines may introduce unexpected errors.
CAUTIONS AND WARNINGS
File Security and Backup of Data
The customer is responsible for file security and backup routines for
all simulation session data. All use and storage of simulation session
data should be in accordance with local rules, regulations or laws and
is the sole responsibility of the customer.
Regulatory Information
Waste Handling
Link Box
6
The product is in compliance with the essential requirements
of Council Directive 2004/108/EC on electromagnetic
compatibility (EMC); and with the essential requirements of
Council Directive 2006/95/EC relating to electrical equipment
designed for use within certain voltage limits (LVD); and with
Council Directive 2011/65/EU on restriction of the use of
certain hazardous substances (RoHS).
Dispose of in accordance with local requirements and
regulations.
Link Box is in compliance with applicable U.S and Canadian
safety standards and has been certified by Canadian
Standards Association.